초전도 응용기기 안정성 진단을 위한 AE센서용 압전소자의 성능개선 연구
Study on Improvement of the Piezoelectric Properties of Acoustic Emission Sensor to be Used for Superconducting Application Systems
※ 기관로그인 시 무료 이용이 가능합니다.
※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.
4,000원
원문정보
초록
영어
Acoustic emission (AE) signal from an HTS tape has a low signal to noise ratio, due to the large amount of noise caused by the boiling of the liquid cryogen or mechanical vibration from the cryo-cooler. In an attempt to improve the sensitivity of the AE sensor, Pb(Zr0.54Ti0.46)O3 + 0.2 wt% Cr2O3 + 1.0 wt.% Nb2O5 ceramics sintered at 1200°C was synthesized. In addition, the resonance (fr) and anti-resonance frequencies (fa) were measured using the specimens with various thicknesses (1.0, 1.5, 2.0, 2.5 and 3.0 mm). According to the test results, large AE signals with high frequencies were obtained from the AE sensor fabricated using a piezoelectric disc with a thinner thickness.
목차
Abstract 1. 서론 2. 압전소자의 제작 및 특성 분석 2.1. 압전소자의 제조 2.2. AE 센서의 제작 및 특성평가 2.3. 반복 퀜치 실험 3. 결과 및 토의 3.1. 압전체의 두께에 따른 센서 특성 3.2. 반복퀜치 실험 결과 4. 결론 참고문헌