Earticle

초록

영어

A micelle-fractional precipitation hybrid process was developed for the effective pre-purification of the anticancer agent paclitaxel extracted from plant cell cultures. By removing waxy substances originating from plant cells using the adsorbent sylopute, the efficiency of the subsequent pre-purification process could be remarkably enhanced. Paclitaxel yield was improved and the fractional precipitation time was shortened compared to the control by increasing the surface area per working volume (S/V) of the reacting solution through the addition of a cation exchange resin (Amberlite IR120 or Amberlite 200), an anion exchange resin (Amberlite IRA400 or Amberlite IRA96), or glass beads. Most of the paclitaxel (>98%) could be obtained after about 12 h of fractional precipitation using Amberlite 200. Purity increased with increasing fractional precipitation time up to 9 h to about 85%, after which it showed little change. On the other hand, no paclitaxel precipitate was formed using either of the nonionic exchange resins because paclitaxel, which is hydrophobic, was strongly adsorbed on the hydrophobic
resin surface. Since high purity paclitaxel can be obtained in high yield and the precipitation time can be reduced by combining micelle formation with fractional precipitation, this hybrid method is expected to significantly enhance the final purification process.

키워드

저자

• Min-Gyeong HAN [ Department of Chemical Engineering, Kongju National University, Cheonan 330-717, Korea. ]
• Keum-Young JEON [ Department of Chemical Engineering, Kongju National University, Cheonan 330-717, Korea. ]
• Jin-Hyun KIM [ Department of Chemical Engineering, Kongju National University, Cheonan 330-717, Korea. ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국생물공학회 학술대회

• 간기

  반년간

• 수록기간

  1985~2013

• 십진분류

  KDC 476 DDC 576