A supercritical fluid process, called aerosol solvent extraction system (ASES), is especially suitable to the pharmaceutical, cosmetic and food industries due to its environmentally-friendly, non-toxic and residual solvent-free properties. In particular, the application of the ASES process to the processing of thermo-labile bioactive compounds has received attention of many scientists and engineers because of its low-temperature operating conditions. Unstable substances such as Vitamin-C and Vitamin-A can be effectively protected from degradation during the preparation process, because the ASES process is free from oxygen and moisture. In this study, Vitamin-C was formulated with 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) for enhancement of Vitamin-C stability and bioavailability using the ASES process. To investigate the influence of the preparation process on the stability of Vitamin-C, Vitamin-C/HP-β-CD inclusion complexes were prepared using both conventional solvent evaporation method and ASES process, and stored in a 50 mM phosphate buffer solution of pH 7.0 at 25℃ for 24 hours. From the experimental results, the stability of the Vitamin-C/HP-β-CD inclusion complex prepared from the ASES process was found to be much higher than that of pure Vitamin-C and the Vitamin-C/HP-β-CD inclusion complex prepared by the solvent evaporation method. The stability of Vitamin-C was observed to increase with the decrease of temperature at a constant pressure or with the increase of pressure at a constant temperature.
한국어
본 연구에서는 초임계 ASES 공정을 이용하여 인체내 및 피부에 여러 가지로 유익한 대표적 생리활성물질인 Vitamin-C의 불안정성을 극복하기 위하여 HP-β-CD와의 포접복합체를 제조하여 수용액상에서의 안정성을 분석하였다. X-선 회절을 이용한 Vitamin-C와 HP-β-CD의 결정성 분석으로 초임계 ASES 공정을 통하여 포접복합체가 용이하게 형성될 수 있음을 확인하였다. HP-β-CD가 Vitamin-C의 안정성을 향상시키는 방법으로 이용될 수 있음을 확인하였으며, 25 ± 0.1℃의 온도를 유지한 pH 7.0의 50 mM 인산완충용액 상에서 순수한 Vitamin-C, 물리적인 혼합물 및 용매증발법과 초임계 ASES 공정을 이용하여 제조된 포접복합체의 Vitamin-C 겉보기 1차 분해 속도 상수는 각각 1.45 × 10-2 h-1 , 1.41 × 10-2 h-1, 1.34 × 10-2 h-1, 0.20 × 10-2 h-1로 초임계 ASES 공정으로 제조된 포접복합체의 경우 Vitamin-C의 안정성이 매우 크게 향상되는 것을 확인하였다.
목차
Abstract 서론 재료 및 방법 실험재료 용매 증발법 초임계 ASES 공정 포접복합체 입자 분석 안정성 시험 결과 및 고찰 요약 REFERENCES
한국생물공학회 [The Korean Society for Biotechnology and Bioengineering]
설립연도
1984
분야
공학>생물공학
소개
이 법인은 생물 공학의 발전과 보급에 이바지하고, 회원 상호 간의 연구 협력과 친목을 도모함을 목적으로 한다
1. 생물공학 분야의 발전을 위한 연구 협력
2. 생물공학의 실용화를 촉진시키기 위한 산학 협동
3. 학술연구 발표회, 강연회, 연수회 등 학술활동의 개최
4. 국,영문 학술지,소식지,학술회의 Proceedings 및 학술도서의 발간
5. 생물공학 발전을 위한 정책 건의
6. 기타 국제 교류 등 본 학회의 목적 달성을 위한 제반 활동