Chitin-based fibers have low mechanical strength and hence cannot be used as surgery fiber due to fast degradation In tissues. A new fiber Chitulose was made by mixing chitin with cellulose, both of which have similar structure. A mixture of dimethylacetamide (DMAc) and 6% lithium chloride (LiCl) was found to be an effective solvent system for dissolvoing chitin and cellulose. The Chitulose fiber made by wet spinning of a mixture of chitin and cellulose resulted in the highest degree of strength and flexibility when the ratio of chitin to cellulose was 1.5; 0.2. The fiber maintained mechanical structure even after autoclaving, indicating thermal stability. A biodegradability test of the Chitulose fiber by imbeding in a rat showed that degradation was initiated in 14 days and completely done in 40 days.
한국어
Chitin 섬유는 인장강도가 기대치 보다 약하며 생 체조직 내에서 흡수도가 너무 빨라 수술 후 2주일 정도의 강도 유지밖에 못하는 단점 등이 었으므로, chitin과 그 구조가 비슷한 cellulose와 혼합하여 인 장력과 유연성이 크게 증대된 Chitulose 섬유를 개 발하였다. 우선 chitin과 cellulose가 잘 용해되어 혼 합펼 수 있는 용매로서 DMAc/LiCl을 탐색하였으며 이 용애계에 용해시킨 Chitulose 용액을 가지고 습 식방사하여 얻은 Chitulose 섬유 중, 용매에 대한 chitin cellulose 함량비가 1.5: 0.2얼 때, Instron 시험결과 강도와 유연성이 가장 좋았으며, 멸균시 autoclave해도 변화되지 않아 열에 매우 안정한 것 으로 나타났다. 이 섬유를 가지고 400-500g되는 백서의 피하조직에 매몰시킨 후, 생체 내 분해흡수 도를 관찰한 결과, 매볼 후 14일부터 분해되기 시작 하여 40일 후에는 완전히 분해흡수되였다.
목차
ABSTRACT 서론 재료 및 방법 시약 및 기기 Chitin과 a-Cellulose의 전처리 DMAc/LiCl 용매계에 의한 Chitin, α-Cellulose, Chitin+a-Cellulose 혼합물의 용해 방사 섬유의 강도실험 섬유의 토양내에서의 분해도 관찰 섬유의 생체적합도 및 생체분해도 측정 결과 및 고찰 Chitin과 a-Cellulose의 전처리 DMAc/LiCI 용매에 의한 Chitin, a-Cellulose, Chitin+a-Cellulose 혼합물의 용해 DMAc/LiCI 용매에 의한 Chitulose 용액의 방사후 표면구조의 관찰 섬유의 강도실험 CHITULOSE fiber의 생체적합성 및 생분해성 요약 참고문헌
한국생물공학회 [The Korean Society for Biotechnology and Bioengineering]
설립연도
1984
분야
공학>생물공학
소개
이 법인은 생물 공학의 발전과 보급에 이바지하고, 회원 상호 간의 연구 협력과 친목을 도모함을 목적으로 한다
1. 생물공학 분야의 발전을 위한 연구 협력
2. 생물공학의 실용화를 촉진시키기 위한 산학 협동
3. 학술연구 발표회, 강연회, 연수회 등 학술활동의 개최
4. 국,영문 학술지,소식지,학술회의 Proceedings 및 학술도서의 발간
5. 생물공학 발전을 위한 정책 건의
6. 기타 국제 교류 등 본 학회의 목적 달성을 위한 제반 활동