Earticle

경도 조절이 가능한 토기 복원용 에폭시의 제조 및 특성
Manufacturing and Characteristics of Hardness Controllable Epoxy for Restoration of Earthenware

  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 권호(발행년)
    제39권 제4호 (2023.12) 바로가기
  • 페이지
    pp.631-639
  • 저자
    박민선, 위광철
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A442537

원문정보

초록

한국어
토기 복원을 위한 경도 조절이 가능하도록 Fatty acids, tall-oil, reaction products with tetraethylenepentamine와 1-(2-Aminoethyl)piperazine를 기반으로 한 에폭시 수지를 혼합하여 2 종 의 경화제를 제조하였다. 혼합된 에폭시 수지는 2액 반응 경화형으로 제조되어 약 40∼65 Hs 내외에서 경도를 조절할 수 있었으며, 27∼121 kgf/mm2의 인장강도와 20∼30 min의 경화시간 을 확보하였다. 또한 기존의 복원 재료보다 2 배 증진된 마모율과 이를 배합 비율에 따라 조정 할 수 있으며, 향후 다양한 충전제가 혼합 가능하도록 제조하였다. 이러한 결과는 토기 복원 재료의 문제점으로 지적되었던 강한 경도와 인장성, 접착력 등으로 인해 발생했던 가공성, 작업 성, 경화 후 토기 표면과의 장력으로 인한 피로도 증가 등을 해결할 수 있는 복원 재료를 제시하 고 실제 복원에 사용될 수 있는 재료로 판단된다.
영어
Fatty acids, tall-oil, reaction products with tetraethylenepentamine and 1-(2-aminoethyl) piperazine-based epoxy resin were mixed to manufacture 2 types of hardener to enable hardness control for restoration of earthenware. The mixed epoxy resin was manufactured in 2-solution reaction hardening type to control the hardness in the range of approximately 40∼65 Hs, and tensile strength in the range of 27∼121 kgf/mm2 and hardening type of 20∼30 min were secured. Moreover, it has wear rate that has been enhanced by 2 folds compared to the existing restoration material, which can be controlled in accordance with the mixing ratio, and was manufactured to enable mixing of diversified fillers later on. These results indicate that this is a restoration material that can solve the problems pointed out for the earthenware restoration materials such as processability and workability that occurred due to high level of hardness, tensile force and adhesion strength, etc., and increase in the level of fatigue due to tension with earthenware surface, etc. Accordingly, it is deemed that it is a material that can be used in actual restoration.

목차

초록
ABSTRACT
1. 서론
2. 재료 및 방법
2.1. 연구재료
2.2. 연구방법
3. 결과 및 고찰
3.1. 에폭시 혼합 결과
3.2. 물성 실험 결과
4. 결론
REFERENCES

저자

  • 박민선 [ Min-Seon Park | 국립광주박물관 보존과학실 ]
  • 위광철 [ Koang-Chul Wi | 한서대학교 문화재보존학과 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      보존과학회지 [Journal of Conservation Science]
    • 간기
      연5회
    • pISSN
      1225-5459
    • eISSN
      2287-9781
    • 수록기간
      2003~2026
    • 등재여부
      KCI 등재
    • 십진분류
      KDC 602 DDC 700