Earticle

Changes of Physical and Chemical Properties for Making Raw Materials and Reproductions According to Manufacturing Stages in Traditional Korean White Porcelain

원문정보

초록

영어
We made a Korean white porcelain or Joseon Baekja jar and based on the raw materials used and reproductions of each stage, we aimed to compare and analyze the physicochemical changes of the raw materials such as clay at each manufacturing stage, as well as identify the characteristics and correlations. Although the basic main components of clay and glaze material are similar, their texture becomes denser in the process of bisque firing pottery (Chobeol-pyeon) and glaze firing pottery (Jaebeol-pyeon), and we confirmed that in addition to the tendency of increasing vitrification, low-temperature minerals such as mica and illite gradually disappeared, while high-temperature minerals such as cristobalite were newly created. This phenomenon has also been verified by the rapid decrease in absorption rate while the change in specific gravity was small. In addition, the color was greatly affected by the firing atmosphere, and the yellow-red chromaticity of the raw materials was higher during bisque firing but showed a rapidly decreasing characteristic during glaze firing. The value of magnetic susceptibility, which is related to iron (Fe) component, showed a tendency to decrease in glaze firing pottery. CT images were confirmed as a method that can indirectly estimate the change in the material properties of the object step-by-step for the entire object. In conclusion, the study of manufacturing stages of reproduction can provide basic data for scientific research on the estimation of porcelain and pottery making technology and changes in raw materials.

목차

ABSTRACT
1. INTRODUCTION
2. SUBJECT AND METHODS
2.1. Subject
2.2. Methods
3. RESULTS
3.1. Color difference
3.2. Constituent minerals
3.3. Major components
3.4. Magnetic susceptibility of reproductions
3.5. Apparent porosity, absorption rate, and specific gravity of reproductions
3.6. Surface properties of reproductions
3.7. Characteristics of reproduction’s cross-sectional texture
3.8. Image analysis of reproductions
4. DISCUSSION AND CONCLUSTIONS
ACKNOWLEDGEMENTS
REFERENCES

저자

  • Du Hyeon Kim [ Department of Heritage Conservation and Restoration, Graduate School of Cultural Heritage, Korea National University of Cultural Heritage, Buyeo 33115, Korea ]
  • Ji Youn Jeong [ Department of Heritage Conservation and Restoration, Graduate School of Cultural Heritage, Korea National University of Cultural Heritage, Buyeo 33115, Korea ]
  • Eun Jeong Oh [ Department of Heritage Conservation and Restoration, Graduate School of Cultural Heritage, Korea National University of Cultural Heritage, Buyeo 33115, Korea ]
  • Min Su Han [ Department of Heritage Conservation and Restoration, Graduate School of Cultural Heritage, Korea National University of Cultural Heritage, Buyeo 33115, Korea ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      보존과학회지 [Journal of Conservation Science]
    • 간기
      연5회
    • pISSN
      1225-5459
    • eISSN
      2287-9781
    • 수록기간
      2003~2026
    • 등재여부
      KCI 등재
    • 십진분류
      KDC 602 DDC 700