Earticle

초록

영어

Agricultural solar power is a method in which crops are grown on the ground and solar power panel is installed on top. At the current level, panel support frames are installed at span of 4 to 6 m, but if the span of the structure is widened, it is possible to increase agricultural activity and secure additional cultivation area. Therefore, in this study, the long-span frame with 12m span of the photovoltaic power generation facility was suggested and the safety of the structure supporting it was reviewed. The wind load acting as a critical load on the structure was calculated according to KDS 41 10 15, the building structure design standard, and the stress ratio, reaction force and serviceability were reviewed after designing a 12m long span by removing the central column from the current 6m span. In addition, the appropriateness of lengthening the structure was reviewed through quantity surveyor, and the optimal sectional sizes of the member according to the KDS were proposed.

목차

Abstract
1. 서론
1.1 연구배경 및 목적
1.2 연구방법
2. 설계하중 산정
2.1 연구대상 구조물
2.2 풍하중 산정
3. 구조물 내력평가
3.1 응력비 검토
3.2 반력 검토
3.3 사용성 검토
3.4 물량산출
4. 지역별 최적 부재 단면 설계
5. 결론
REFERENCES

저자

• 신지원 [ Shin, Ji-Won | 경북대학교 건설환경에너지공학부 석사과정 ]
• 이희두 [ Lee, Hee-Du | 경북대학교 건설안전기술연구소 전임연구원, 공학박사 ]
• 신혜민 [ Shin, Hye-Min | 경북대학교 건설환경에너지공학부 박사과정 ]
• 신경재 [ Shin, Kyung-Jae | 경북대학교 건축학부 교수, 공학박사 ] Corresponding Author

참고문헌