Earticle

다운로드

다량의 석탄회를 활용한 슬러리계 되메움 재료의 공학적 특성 평가
Engineering Characteristics Evaluation of Controlled Low Strength Materials Used High Volume Coal Ash

  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 권호(발행년)
    제23권 제6호 통권 106호 (2021.12) 바로가기
  • 페이지
    pp.53-60
  • 저자
    김동훈
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A405333

원문정보

초록

영어
In this study, the following conclusion was derived from the evaluation of the engineering nature of CLSM using a large amount of CA. First, the result was confirmed that it is effective in ensuring a flow for field application if the unit quantity is set to 370 to 385 (kg/m3) and the AE agent is mixed to 0.3~0.35 (kg/m3), when the c/a ratio is set to 35% or more. Second, when the ratio of c/a is set to 35% or more, it was confirmed that the AE agent is mixed to be effective in suppressing the bleeding rate if the unit quantity is set to 385 (kg/m3) or less. Third, CLSM with 30% and 35% c/a ratios set, respectively, showed the most intensity motion for field application. Fourth, it was confirmed that a fine amount below the acceptable standard was detected for heavy metal ions such as As, Pb, Cd, and Se other than Cr, resulting in no effect on the surrounding environment by the use of CA.

목차

Abstract
1. 서론
1.1 연구배경 및 목적
1.2 연구범위 및 방법
2. 실험계획
2.1 실험재료
2.2 배합 및 공시체, 양생
2.3 시험항목
3. 실험결과 및 분석
3.1 유동성
3.2 블리딩
3.3 일축압축강도
3.4 환경성 평가
4. 결론
REFERENCES

저자

  • 김동훈 [ Kim, Dong-Hun | 동명대학교 건축공학과 겸임교수, 공학박사 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
    • 간기
      격월간
    • pISSN
      1229-5752
    • 수록기간
      1999~2026
    • 등재여부
      KCI 등재
    • 십진분류
      KDC 540 DDC 690