Earticle

다운로드

자동차에서의 공기의 유입구에 따른 유동해석에 관한 융합 고찰
Convergent Investigation on Flow Analysis According to the Inlet Port of Air at Car

  • 간행물
    한국융합학회논문지 KCI 등재 바로가기
  • 권호(발행년)
    제11권 제5호 (2020.05) 바로가기
  • 페이지
    pp.159-164
  • 저자
    오범석, 조재웅
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A375642

원문정보

초록

한국어
본 연구에서는 자동차에서의 공기의 유입구에 따른 자동차 내부에서의 유동 해석을 하였다. 공기가 들어오는 유입구로서 쾌적성이 좋은 조건으로서는 유입구가 자동차의 상단 중간이나 전방위치임을 확인할 수 있었다. 차량 내부 에 공기 유동의 고르게 분포가 안되는 경우는 자동차의 하단 위치가 유입구의 모든 조건들 중에서 가장 저조한 조건하 다. 본 연구 결과를 통하여 탑승자의 기호나 상황에 맞게 공기의 유입이 되도록 그 유입구의 위치를 조절하므로서 자동 차 내부의 상태를 쾌적하게 유지할 수 있는데 도움이 될 것이다. 본 연구의 설계 및 해석 결과는 실제적으로 자동차에서 의 공기의 유입구의 위치를 조절하는 데에 효율적으로 적용할 수 있다. 자동차에서의 공기의 유입구에 따른 유동해석을 적용함으로서, 본 논문이 미적인 설계에 부합된 융합 연구라고 보여진다.
영어
In this study, the flow analysis of air in the inner side of vehicle due to the position on inlet port of air at car was carried out. Under the comfortable condition as the inlet port in which the air flows, it was possible to confirm that the inlets became the upper and middle sides or the forward side of the vehicle. If the air flow is not evenly distributed within the vehicle, the lower position of the vehicle is the lowest condition among all conditions. The results of this study will help to keep the inner state of the vehicle pleasant by adjusting the location of the inlet to suit the passenger's taste or situation. The design and analysis results of this study can be effectively applied at adjusting the location of the inlet at car. By applying the flow analysis according to the inlet port of air at car, this paper is seen as the convergence study that conforms to aesthetic design.

목차

요약
Abstract
1. 서론
1.1 연구배경
1.2 연구방법
2. 본론
2.1 3D 모델링들 및 유동해석 조건들
2.2 유동해석 결과들
3. 결론
REFERENCES

저자

  • 오범석 [ Bum-Suk Oh | 공주대학교 기계자동차공학부 교수 ]
  • 조재웅 [ Jae-Ung Cho | 공주대학교 기계자동차공학부 교수 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      한국융합학회논문지 [Journal of the Korea Convergence Society]
    • 간기
      월간
    • pISSN
      2233-4890
    • 수록기간
      2010~2022
    • 십진분류
      KDC 530 DDC 620