Earticle

초록

한국어

본 연구에서는 불연성 무기단열재를 제조하기 위해 바인더 종류를 대체하여 열전도율을 충족시키고 경량 무기단열재 개발을 위해 연구하였다. 열전도율 측정은 열전도 측정기인 HFM-436을 이용하여 열전도율을 측정하였다. 무기단열재를 바인더 SH-1(액체), SH-2(고 체)와 펄라이트를 배합하여 단열재 샘플1을 만들었고, SH-3(액체)와 펄라이트를 배합하여 단열재 샘플 2를 제조했다. 총 4개의 샘플을 제조했다. 각각 바인더와 펄라이트를 틀에 넣 어 성형하였으며 완전건조 후 HFM-435을 이용하여 열전도율을 측정하였다. 두 가지 다른 바인더를 사용하여 열전도율을 측정하였고 바인더에 따른 열전도율의 영향을 분석하였다.

영어

In this study, we conducted about the manufacture of a non-combustible inorganic insulation by replacing the binder type for satisfaction of thermal conductivity for developing a lightweight inorganic insulation. Thermal conductivity was measured using a machine of HFM-436. We made samples are inorganic insulation by using SH-1(liquid) of S company and SH-2(solids). By Mixing Pearlite and SH-4(Liquid) was produced as insulation sample 2. Each was shaped into a binder and pearlite in the frame. After complete drying, thermal conductivity was measured by using HFM-435. The thermal conductivity was determined using two different binder. We analyzed the effect on thermal conductivity in binder.

목차

ABSTRACT
 요약
 1. 서론
 2. 단열재의 제작 및 특성 시험방법
  2.1 펄라이트
  2.2 무기 바인더
  2.3 제작 방법
 3. 실험 분석
  3.1 실험 방법
 4. 결론
 감사의 글
 References

저자

• Chanki Jeon [ Department of Urban Construction Engineering, Incheon National University, 119 Academy-ro Yeonsu-gu, Incehon 406-772, Republic of Korea ] Corresponding author
• Jaeseong Lee [ Master course of Urban Construction Engineering, Incheon National University, 119 Academy-ro Yeonsu-gu, Incehon 406-772, Republic of Korea ]
• Hoon Chung [ Master of Chemistry Engineering, SunHan M&T, 663-13 Gojan–dong, Nandong-gu, Incheon 405-818, Republic of Korea ]
• Jongpil Park [ Master course of Urban Construction Engineering, Incheon National University, 119 Academy-ro Yeonsu-gu, Incehon 406-772, Republic of Korea ]
• Jaeyeong Shim [ Ph.D student of Urban Construction Engineering, Incheon National University, 119 Academy-ro Yeonsu-gu, Incehon 406-772, Republic of Korea ]

참고문헌