Earticle

다운로드

매입형 FRP Rod와 FRP시트를 복합 보강한RC 외부 보-기둥 접합부의 내진성능
Seismic Performance of Reinforced Concrete Exterior Beam-Column Joints using Hybrid Retrofitting with Embedded FRP Rods and FRP Sheets

  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 권호(발행년)
    제16권 제2호 통권 60호 (2014.04) 바로가기
  • 페이지
    pp.75-82
  • 저자
    하기주, 강현욱
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A217718

원문정보

초록

한국어
본 연구에서는 기존 철근콘크리트 건물의 보-기둥 접합부의 내진성능의 개선을 위해 외부 보-기둥 접합부 영 역을 FRP보강재(매입형 CFRP Rod, CFRP시트, 아라미드섬유시트)를 사용하여 복합 보강한 후 내진성능을 평 가하였다. 총 5개의 실험체를 제작하고 실험을 수행하여 내진성능을 평가하였으며, 본 연구의 실험결과를 근 거로 다음과 같은 결론을 얻었다. 기존 철근콘크리트 외부 보-기둥 접합부의 접합부 영역을 보강한 결과, 초기 재하시 접합부 영역의 균열억제 효과와 재하 전 과정을 통하여 보강재의 구속효과로 인하여 균열억제 효과가 커서 안정적인 파괴형태 및 내력 향상 효과를 나타내었다. 매입형 CFRP Rod와 CFRP시트, 아라미드섬유시트를 복합 보강한 RC 외부 보-기둥 접합부 실험체 RBCJ- SRCB 시리즈, RBCJ-SRA3는 표준실험체 RBCJ와 비교하여 변위연성3에서 최대 내력은 각각 2.12, 2.00배 증 가하였고, 에너지소산능력은 변위연성5에서 각각 1.90, 1.65배 증가하였다.
영어
In this study, experimental research was carried out to evaluate and improve the seismic performance of reinforced concrete beam-column joint regions using hybrid retrofitting with the various materials (embedded FRP Rod, CFRP sheet, and Aramid fiber sheet) in existing reinforced concrete building. Therefore it was constructed and tested five specimens retrofitting the beam-column joint regions using such retrofitting and materials. Specimens, designed by hybrid retrofitting the beam-column joint regions of existing reinforced concrete building, were showed the stable failure mode and increase of load-carrying capacity due to the effect of crack control at the times of initial loading and confinement of retrofitting materials during testing. Specimens RBCJ-SRCB series, RBCJ-SRA3 designed by the hybrid retrofitting with embedded FRP Rod, CFRP Sheet, and Aramid fiber sheet in reinforecd beam-column joint regions were increased its maximum load carrying capacity each by 2.12, 2.00 times and its energy dissipation capacity each by 1.90, 1.65 times in comparison with standard specimen RBCJ for a displacement ductility of 3, 5.

목차

Abstract
 1. 서론
  1.1 연구배경 및 목적
  1.2 연구의 방법
 2. 매입형 FRP Rod와 FRP시트를 복합 보강한 RC 외부 보-기둥 접합부의 내진성능 실험
  2.1 실험체의 형태 및 변수
  2.2 사용재료 특성
  2.3 실험방법 및 장치
 3. 매입형 FRP Rod와 FRP 시트를 복합 보강한  RC 외부 보-기둥 접합부의 내진성능 평가
  3.1 이력거동 특성
  3.2 파괴형태
  3.3 강도변화 특성
  3.4 강성변화 특성
  3.5 에너지 소산능력
 4. 결론
 감사의 글
 참고문헌

저자

  • 하기주 [ Ha, Gee-Joo | 경일대학교 건축학부 정교수, 사)건설기술정책연구원 원장, 공학박사 ]
  • 강현욱 [ Kang, Hyun-Wook | 경일대학교 건축학부 박사교수, 사)건설기술정책연구원 선임연구원 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
    • 간기
      격월간
    • pISSN
      1229-5752
    • 수록기간
      1999~2026
    • 등재여부
      KCI 등재
    • 십진분류
      KDC 540 DDC 690