Earticle

Studies in Iron Manufacture Technology through Analysis of Iron Artifact in Han River Basin during the Proto-Three Kingdoms

  • 간행물
    Conservation and Restoration of Cultural Heritage 바로가기
  • 권호(발행년)
    Volume 1 Number 1 (2012.12) 바로가기
  • 페이지
    pp.9-22
  • 저자
    Soo-Ki Kim
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A196270

원문정보

초록

영어
The most widely excavated iron artifacts used as weapons or farm tools from central southern regions of Korea were subjects of non-metallic inclusion analysis through metallographic examination, microhardness measurement, and scanning electron microscopy with energy dispersive X-ray spectroscopy. Through metallographic interpretation and study of the analyzed results, the steel manufacturing and iron smelting using heat processing in the iron artifacts excavated from the central southern region of the ancient Korean peninsula was studied, and the analysis of the non-metallic inclusions mixed within the metallic structures was interpreted as the ternary phase diagram of the oxide to infer the type of iron ores for the iron products and the temperature of the furnace used to smelt them. Most of the ancient forged iron artifacts showed Al2O3/SiO2 with high SiO2 contents and relatively low Al2O3 contents for iron ore, indicating t hat for Al2O3 below 5%, it is presumed that magnetic iron ores were reduced to bloom iron (sponge iron) with direct-reduction process for production. The temperature for extraction of wustite for Al2O3 below 1% was found to be 1,020∼1,05 0℃. Considering the oxide ternary constitutional diagram of glassy inclusions, the steel-manufacturing temperature was presumed to have been near 1,150∼1,280℃ in most cases, and minimum melting temperature of casting iron part excavated in Daeseong-ri. Gyeonggi was near 1,400℃, and it is thought that hypoeutectic cast iron of about 2.3% carbon was casted and fragility of cast iron was improved by decarburizing in solid state.

목차

Abstract
 1. INTRODUCTION
 2. IRON OBJECTS FOR STUDY
 3. ANALYTICAL METHOD
  3.1. Microstructure investigation
  3.2. Analysis and interpretation of nonmetallic inclusions
 4. RESULT AND CONSIDERATION
  4.1. Iron objects from Daesung-ri, Gapyeong
  4.2. Iron objects from Yeongjong-do, Incheon
  4.3. Iron objects from Garak-dong, Seoul
  4.4. Summary and discussion
 5. CONCLUSION
 REFERENCE

저자

  • Soo-Ki Kim [ Department of Cultural Heritage, Yongin University, Yongin 449-714, Korea ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      Conservation and Restoration of Cultural Heritage
    • 간기
      연간
    • pISSN
      2288-0798
    • 수록기간
      2012~2012
    • 십진분류
      KDC 602 DDC 700