Earticle

시판용 접착제의 지류보존처리 적합성 판단을 위한 열화 특성 연구
A Study of the Aging Properties of the Common Synthetic Resin Adhesives for Paper Conservation Purposes

  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 권호(발행년)
    제28권 제4호 (2012.12) 바로가기
  • 페이지
    pp.387-394
  • 저자
    성연심, 염인경
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A188760

원문정보

초록

한국어
전문적인 보존시설이 없는 대부분의 도서관에서는 손상된 도서의 간단한 수선 처리 및 응급조치 시 일반시판용 합성수지 접착제를 사용하고 있고, 이는 크게 PVAc 계열(Pa), 아크릴 계열(Ac)과 PVP 계열(Pv)로 나눠진다. 국립중앙도서관 자료보존실에서 사용하고 있는 보존용 합성수지 접착제(Pa-1)와 일반시판용 합성수지 접착제 중 대표적인 접착제를 골라 열화특성을 연구하기 위해 인공열화를 진행한 뒤, 약 한 달 동안 산성도(pH)와 색도를 측정하였다. 산성도 실험 결과에서 Pa-1(pH 7~7.5)과 Ac-2(pH 6.5~8)는 보존처리에 적합한 범위를 나타내었다. 색도실험에서 황변도를 나타내는 △b*는 Pa-1
영어
Most of the libraries and archives that lacks conservation lab facilities, frequently apply common synthetic resin adhesives such as PVAc group(Pa), acrylic group(Ac) and PVP group(Pv) on simple repairs. The archival quality synthetic adhesive(Pa-1) that is used at the National Library of Korea and the common synthetic resin adhesives were selected for the experiments. Accelerated aging test was applied on the adhesive samples and change of the pH and chromaticity were measured for one month. As the result of the pH mesurments, Pa-1 and Ac-2 were at the acceptable pH range. As the result of the chromaticity mesurments, degree of yellowing(△b*) showed smaller change to greater change in the following order; Pa-1

목차

초록
 ABSTRACT
 1. 서론
 2. 이론적 배경
  2.1. 시판용 접착제
  2.2. 산성도
  2.3. 색도
 3. 재료 및 방법
  3.1. 실험재료
  3.2. 실험방법
 4. 결과 및 고찰
  4.1. 산성도(pH) 측정 결과 및 고찰
  4.2. 색도 측정 결과
  4.3. 인공열화 후 상태 변화
 5. 결론
 감사의 글
 참고문헌

저자

  • 성연심 [ Yeonsim Sung | 국립중앙도서관 자료운영과 자료보존실 ]
  • 염인경 [ Inkyung Youm | 국립중앙도서관 자료운영과 자료보존실 ]

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      보존과학회지 [Journal of Conservation Science]
    • 간기
      연5회
    • pISSN
      1225-5459
    • eISSN
      2287-9781
    • 수록기간
      2003~2026
    • 등재여부
      KCI 등재
    • 십진분류
      KDC 602 DDC 700