Earticle

다운로드

매스콘크리트의 수화열 저감을 위한 단열온도상승시험 및 모의시험체의 온도특성
Temperature Characteristics of Mock-up Structures and Adiabatic Temperature Raising Test for Hydration Heat Reduction of Mass Concrete

  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 권호(발행년)
    제14권 제2호 통권 50호 (2012.06) 바로가기
  • 페이지
    pp.217-223
  • 저자
    연규원, 김종
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A177270

원문정보

초록

한국어
본 연구에서는 건축물 매트기초 매스콘크리트의 수화열 저감 및 경제성 성취에 활용될 수 있도록 배합종류 변화에 따른 단열온도상승특성과 모의부재 실험을 통하여 적용가능성에 대하여 검토하고자 하였다. 실험 결과에 따르면 먼저, 단열온도상승 특성으로 배합 종류에 따라 단열온도상승식을 근사식 을 검토하여 결정계수(R2) 0.994이상이 되는 식을 얻을 수 있었으며, 각 배합에 따라 최고 온도상승량과 수화반응에 의한 발열시점을 보다 정확히 확인 할 수 있었다. 모의부재의 수화열 온도이력 특성으로 모의부재 C의 경우 모의부재 A와 비교 하여, 최고온도는 약 7.5℃ 저감 시켰다. 또한 상부콘크리트가 먼저 수화발열함으로서 표면부의 인장응력에 대한 온도균열을 제어 할 수 있는 것으로 나타났다. 압축강도 특성으로 배합종류별 표준양생공시체의 경우 플라이애시를 치환한 S-F30, R-F30콘크리트는 치환하지 않은 S-P, E-P콘크리트 보다 압축강도가 약 5~10MPa정도 재령 28에서 저하된 것으로 나타났으나, 코어압축강도의 경우에서는 플라이애시 치환사용에 따른 차이가 없는 것으로 분석되었다.
영어
This paper investigates the applicability of hydration heat reducing method of mass concrete structure for mat foundation studied by the authors to achieve volumetric stability and economical profit. Hydration heat reducing method developed by the authors reflects the difference of produced heat during hydration period between placing layers. Adiabatic Temperature Rising Test and mock-up test are carried out varying with mixture proportion. According to results, function is applied to estimate hydration heat development with age. By computing the function above, maximum temperature rise and the time to initiate heat production are clarified with different mixture proportion more accurately. Mock-up specimen C has lower maximum temperature than specimen A by as much as 7.5℃. As top section concrete begins to produce a heat earlier than bottom section concrete, occurrence of thermal crack induced by tensile stress at surface can be avoided. For compressive strength, the mixture combination of S-F30, R-F30, which incorporate fly ash exhibits a reduction in compressive strength by as much as 5~10 MPa compared with other mixture combination at 28days. There's no remarkable difference of strength development with and without fly ash based on the results of core test.

목차

Abstract
 1. 서론
 2. 공법의 개요
 3. 실험계획 및 방법
  3.1 실험계획
  3.2 사용재료
  3.3 실험방법
 4. 실험결과 및 분석
  4.1 굳지않은 콘크리트의 특성
  4.2 단열온도상승 특성
  4.3 모의 부재 온도이력 특성
  4.4 압축강도 특성
 5. 결론
 참고문헌

저자

  • 연규원 [ Yeun, Kyu-Won | (주)선엔지니어링종합건축사사무소 기술연구소장, 공학박사 ] 교신저자
  • 김종 [ Kim, Jong | (주)선엔지니어링종합건축사사무소 기술연구소 과장, 공학박사 ]

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
    • 간기
      격월간
    • pISSN
      1229-5752
    • 수록기간
      1999~2026
    • 등재여부
      KCI 등재
    • 십진분류
      KDC 540 DDC 690