Earticle

초록

영어

Compressive strength properties of power plant bottom ash-based geopolymer having was examined. The fine structures generated from activation reaction of sodium hydroxide were widely distributed for the factors that exercise an effect on compressive strength of the geopolymer hardening bodies. And also it has shown that it is possible to manufacture geo-polymer hardening bodies having maximum strength of about 60 to 70 MPa with the ranges of Si/Al ratios 2.41 to 2.69 for case of bottom ashes only, 2.84 to 3.46 for case of adding blast furnace slag of 10wt%, and 2.81 to 3.16 for case of adding it of 20wt%.

목차

Abstract
 1. 서론
  1.1 연구의 목적
 2 실험 계획 및 방법
  2.1 실험 계획
  2.2 실험 방법
 3 실험 결과 및 고찰
  3.1 CBA 및 BFS의 기초물성 분석결과
  3.2 CBA와 BFS의 혼합비율에 따른 지오폴리머의 압축강도 특성
  3.3 CBA와 BFS의 혼합비율에 따른 지오폴리머의 미세구조 특성
 4. 결론
 참고문헌

저자

• 안응모 [ An, Eung-Mo | 충남대학교 건축공학과 석사과정 ]
• 김규용 [ Kim, Gyu-Yong | 충남대학교 건축공학과 부교수⋅공학박사 ]
• 미야우치 히로유키 [ Miyauchi Hiroyuki | 충남대학교 건축공학과 부교수⋅공학박사 ]
• 남정수 [ Nam, Jeong-Soo | 충남대학교 건축공학과 박사과정 ]
• 이수정 [ Lee, su-jeong | 한국지질자원연구원 광물자원연구본부 책임연구원 ]
• 조성백 [ Cho, Sung-Baek | 한국지질자원연구원 광물자원연구본부 책임연구원 ]

참고문헌