Earticle

다운로드

일체형 T-stub으로 연결된 H형강 보-기둥 접합부의 거동에 관한 연구
A Study on the behavior of H-shaped Beam-to-column with the newly Reformed T-stub Connections

  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 권호(발행년)
    제13권 제1호 통권 45호 (2011.03) 바로가기
  • 페이지
    pp.229-236
  • 저자
    신수미, 양창진
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A139182

원문정보

초록

한국어
T-stub 접합은 스플릿티(split tee)라고도 하는 것으로 강성 및 내력면에서 강접합에 가까운 거동을 보이고 있다. T-stub 접합부는 고력볼트와 T-stub 접합을 구성하는 판재의 강성에 따라서 지렛대 효과를 포함하는 상호작용을 일으키므로 해석과 설계가 복잡하다는 단점이 있다. 하지만, 용접접합에 비하여 시공 및 품질관리가 용이하고 내력과 변형 능력이 우수하여 강접합에 가까운 거동을 나타낼 수 있는 장점을 가지고 있다. 본 연구에서는 기존의 분리된 T-stub을 하나로 연결한 일체형 T-stub의 접합부에 대한 변형 성상을 파악하기 위해 지수함수 모델을 이용하여 T-stub을 구성하는 부분인 T-stub의 웨브, 보 웨브, 보 플랜지에 대해 응력-변형률 관계에 대하여 변화를 주어 가력하중과 변형을 수치해석을 통하여 조사하였다. 동일한 모델에 대하여 T-플랜지 길이, 볼트 간격, 볼트 직경을 변수로 하여 11개의 모델에 대하여 실험을 수행한 기존의 연구 결과를 토대로 본 수치해석의 결과를 검증하였다. 경제적이고 적합한 T-stub의 설계방법을 위한 자료를 제공하고자 한다.
영어
Beam-to-column connections are very important in steel structure buildings, and have direct effect on safety and economic efficiency of the buildings. Especially, they have rigidity and ductility that are necessary for behavior and stress transmission of buildings. And it also needed for them to carry the ability of strength and strain with easy construction. The design and analysis of steel structure connections are generally considered to consist of rigid, semi-rigid or pin joint. Deformation characteristic of H-shaped beams with newly T-stub connections is investigated for the effect of these joints on inelastic behavior of the beams in this paper. This research is applied the model of exponential function based on the equations of equilibrium and compatability equations at the location of bolts. It is not considered that prying action reducing both the ultimate load capacity and the fatigue of the bolts in this study. The elasto-plastic behavior has been studied through various model with parameters of the length of T-flange, distance of bolts and the diameter of bolts. The results indicated that the distance of bolts has a great effect on the ultimate strength and deformation capacity of T-stub connections. The presented method may be an useful tool for the design of T-stub connections.

목차

Abstract
 1. 서론
  1.1 연구배경 및 목적
  1.2 연구범위 및 방법
 2. 수치해석
  2.1 지수함수
  2.2 프로그램
 3. 해석 결과 및 분석
  3.1 해석모델
  3.2 해석 방법의 적용 및 고찰
 4. 결론
 참고문헌

저자

  • 신수미 [ Shin, Soo-Mi | 부산대학교 ] 교신저자
  • 양창진 [ Park, Sung-Soo | 동서대학교 ]

참고문헌

자료제공 : 네이버학술정보

    간행물 정보

    • 간행물
      대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
    • 간기
      격월간
    • pISSN
      1229-5752
    • 수록기간
      1999~2026
    • 등재여부
      KCI 등재
    • 십진분류
      KDC 540 DDC 690