Earticle

초록

영어

The Purpose of this paper is an additional research about methodology for preliminary design of diagrid system. Some cases of structures were designed by methodology for preliminary design which was studied by Moon, K, and then these cases were analyzed for lateral behavior of structure depending on size of module. In order to make sure of these result, an additional research was conducted about optimal s value in expanded range. If effective design is defined that maximum displacement of structure is close to target displacement, as the module became smaller, the structure was designed effectively and required tonnages of steel decreased.
When selecting size of diagrid member by methodology for preliminary design, it tends to have high redundancy compared with desired performance. So this study tried to solve this problem by adopting expended s value and suggested s value table was included the end of the study.

목차

Abstract
 1. 서론
 2. 다이아그리드의 예비설계법
 3. 모듈 크기에 따른 영향력 평가
  3.1 해석모델 및 변수
  3.2 해석 결과
  3.3 고찰
 4. 세장비에 따른 최적 s값
  4.1 해석모델 및 변수
  4.2 해석 결과
  4.3 고찰
 5. 결론
 참고문헌

저자

• 김기웅 [ Kim, Kee-Woong | 부산대학교 건축공학과 대학원 석사과정 ] 교신저자
• 우경선 [ Woo, Kyung-Sun | 부산대학교 건축공학과 대학원 박사수료 ]
• 박성수 [ Park, Sung-Soo | 부산대학교 건축공학과 교수, 공학박사 ]

참고문헌